Header-Schatten.jpg

300029 Symmetry amplifier

The symmetry amplifier converts a standard PAL video signal in such a way that it can be displayed on indoor stations in SKS 6-wire video BUS systems

  • To connect PAL video signals
  • 12 VDC supply voltage for external camera
  • Max. current consumtion camera: 450 mA
  • Mounting close to the camera
  • RG59 Verbindungsleitung zwischen Kamera und Symmetrieverstärker
  • Working temperature: -10 °C to +50 °C
  • Humidity: 20 % to 90 %, non-condensing
  • Protection type IP20

Dimensions: 49 x 46 x 15 mm (3DU)

300029_Detail.jpg
Description
Technical data
Structural plan
Downloads

The symmetry amplifier converts a standard PAL video signal in such a way that it can be displayed on indoor stations in SKS 6-wire video BUS systems. Thus it is possible to operate any external video camera requiring 12 volt power supply and consuming no more than 450 mA in a SKS 6-wire video BUS system. The symmetry amplifier should be mounted as close as possible to the respective camera. A coaxial cable RG59 must be used for the video signal between camera and symmetry amplifier.

Electrical data
Power supply17 – 24VDC
Camera voltage +12 / GND12VDC
Max. camera power450mA

General

Temperature-10°C bis +55°C
Humidity20% to 90% non-condensing
HousingPlastic housing
Dimensions (width x height x depth)43 x 40 x 15 mm
Protection ClassIP20
300029_Strukturplan.jpg